Steps 10, 11, 12, 13 and 14 for the other two devices. TExaSware and then select the windows_drivers folder. On thisĬomputer Keil was installed on C:, but on your computer search for Keil then Location of the windows-drivers folder installed with TExaS.
LUMINARY MICRO ICDI BOARD DRIVERS UPDATE
Right-click on the device and then select Update Driver Software.Īutomatically or to Browse my computer.
LUMINARY MICRO ICDI BOARD DRIVERS DRIVERS
Interface devices that do not have drivers (yellow exclamation point) Window type device manager) and you should see three In-Circuit Debug Program (click Start, and then in the Search for files and programs The green LED near the USB will illuminate when power is applied. There is a slider switch near the USB that should be in the Debug position. Plug the mini-USB into the socket labelled Debug. Pick the USB port you will most likely want to use. If you have installed TExaS then the drivers Installation of the driver that is not signed according to the normal procedure.Ĩ. Now windows will start and you can do the On the Startup Settings screen press 7 or F7 to disable driver signature enforcement. Notice Disable driver signature enforcement will be an option.ħ. Click on Recovery, and select Restart now under Advanced Startupģ. You will be restarting the machine on which you are installing drivers, so that machine will not be available to view the instructions.Ĭlick the Start menu and select Settings. The steps on your cellphone for reference, or use a second computer to see this web page.
Unfortunately the drivers from Texas Instruments for the LaunchPad are not signed.ĭrivers that are not signed on Windows 10 is as follows. Windows specifies that a kernel-mode driver must be signed for the driver to Signing policy for 64-bit versions of Windows Vista and later versions of
There are a total of three drivers to install, which These two steps are complete then you follow these directions to installĭrivers for the LaunchPad.
0 kommentar(er)
